Safety Notes; Preconditions For Use; Warning Symbols On The Device; Laws And Directives - Siemens SITRANS TDL Operating Instructions Manual

Safety notes

3.1

Preconditions for use

This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the specifications relevant
to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state.
3.1.1

Warning symbols on the device

Symbol
3.1.2

Laws and directives

Observe the test certification, provisions and laws applicable in your country during connection,
assembly and operation. These include, for example:
• National Electrical Code (NEC - NFPA 70) (USA)
• Canadian Electrical Code (CEC Part I) (Canada)
SITRANS TDL
Operating Instructions, 05/2023, A5E51429088_AA
Explanation
Consult operating instructions
Hot surface
Dangerous electrical voltage
Isolate the device from power using a circuit-breaker
Protect the device from impact otherwise loss of degree of protection
Protective insulation; device in protection class II
3
15