Safety Notes; Prerequisites For Safe Use; Warning Symbols On The Device; Laws And Directives - Siemens SIPART PS100 Operating Instructions Manual

Safety notes

3.1

Prerequisites for safe use

This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the specifications relevant
to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state.
3.1.1

Warning symbols on the device

Symbol
3.1.2

Laws and directives

Observe the test certification, provisions and laws applicable in your country during connection,
assembly and operation. These include, for example:
• National Electrical Code (NEC - NFPA 70) (USA)
• Canadian Electrical Code (CEC) (Canada)
Further provisions for hazardous area applications are for example:
• IEC 60079-14 (international)
• EN 60079-14 (EU)
• For Korea only:
SIPART PS100
Operating Instructions, 06/2023, A5E50188938-AF
Explanation
Consult operating instructions
3
15