Table of Contents
Advertisement
Meter overview
DATA LOSS
Failure to follow these instructions can result in loss of data.
Record your device's user and password information in a secure location.
Your meter in an energy management system
As a key piece in your energy management system, the Siemens 9810 series meter provides
highly accurate measurements and calculations for a wide variety of power system values,
performs analysis on collected data, alerts you of potential issues and integrates with a variety of
display and analysis software.
Communications
Supported protocols
Your meter's fundamental protocol and architecture is ION.
You can integrate the meter into various industry-standard networks. Data that the meter
measures can be made available to other devices using:
• Modbus
• DNP 3.0
• DLMS
• SNMP
• MV-90 billing software
You can configure the meter to import data from other devices on these networks. Your meter
supports the IEC 61850 protocol and COMTRADE waveform data format.
Your meter also supports IPv6, Devices Profile for Web Services (DPWS), and Rapid Spanning
Tree Protocol (RSTP) Ethernet protocols.
Meter configuration
ION Setup device configuration tool
ION Setup is a free configuration tool for your meter that lets you remotely configure your meter's
features over Ethernet or serial communications.
• Use the setup screens to guide you through the process of configuring your meter.
• Use the real-time data screens to verify your meter's configuration.
• Use the data screens to view your meter's recorded data.
• Use the charting function to view your meter's recorded waveforms.
19
NOTICE
9810 series - User manual
7EN05-0390-08
Advertisement
Table of Contents
Troubleshooting
