BD FocalPoint GS User Manual page 40

BD FocalPoint™ GS Imaging System Instrument User's Manual
Toolbar Buttons
The toolbar buttons are used to turn BD FocalPoint™ GS Review Station features on and off,
and to control various functions during the screening process. Information on how and when to
use these features is described as it occurs in the workflow (refer to Section 5 for additional
information).
Slide Map in Screen Mode
The slide map portion of the display is located just beneath the primary image area. The slide
map shows the current position of the microscope stage on the slide, illustrates the positions of
the LOI, and displays the slide identification number. For further information on how and when to
use the slide map, refer to Section 5.3.
In screen mode, the bottom of the display does not indicate location in the sequence of dots (for
example dot 1 of 11) as it does in Review mode.
There are two functions available in Screen mode only.
Tracking
If tracking is enabled, the path that the cytotechnologist used to screen the slide is illustrated.
Figure 4-2 illustrates this path on a slide that has been screened.
Electronic Dotting
Electronic Dotting captures and stores x/y coordinates for additional areas of interest. To add a
dot for a location of interest, position the stage over the location, and then either:
• click the middle mouse button
• press the Page Down key on the keyboard
40
Figure 4-2 – Slide map detail