Screening Fovs - BD FocalPoint GS User Manual

BD FocalPoint™ GS Imaging System Instrument User's Manual
The following table demonstrates the function of each button displayed on the bottom of the slide
selection window.
Button Name
FocalPoint Slide
Results
Review
Screen
Sign Out
Calibrate
New Slide
Exit
Refresh
Load More
3.4

Screening FOVs

1 If the BD SurePath™ slide was successfully processed by the BD FocalPoint™ Slide Profiler
and FOVs are available for that slide then the Review button will be enabled.
Some slides may not have FOVs available, i.e., Process Review,
Rerun, or other processing notes such as slide edge not found. If
this is the case then the Review button will be disabled. These
28
Function
This area displays the slide data information
from the BD FocalPoint™ Slide Profiler. This
information provides the ranking, sorting, and
additional information from the
BD FocalPoint™ Slide Profiler processing.
Select this button when reviewing FOVs. Refer
to Section 3.5 for details.
Select this button to perform full slide manual
screening and to use annotations. Refer to
Section 4.3 for additional detail.
This button is an alternative method to batch
sign out (batch sign out is the preferred
method). Refer to Section 3.7 for details.
Select this button to recalibrate the x and y
coordinates of the stage. Refer to Section 3.2.
This button allows slide data to be entered into
the BD FocalPoint™ GS Review Station that
was not processed on the BD FocalPoint™
Slide Profiler. Refer to Section 3.3 for details.
Click this button to close the window.
Click Refresh Icon to refresh the slide list.
Click the Load More Icon to load more slides
from database.
Table 3-2 – Slide Selection window buttons
NOTE
slides require full manual review.