Start-Up Procedure - BD FocalPoint GS User Manual

BD FocalPoint™ GS Imaging System Instrument User's Manual
At this point the system components can be powered down as described in the following steps:
6 Shut off the instrument by turning the switch at the bottom right of the instrument from I to 0.
7 Turn off the printer by pressing the rocker switch from I to 0.
8
Turn off the monitor by pressing the push-button at the lower right corner of the monitor case.
32.5

Start-up Procedure

1 Apply power to each of the following components in the order given:
a CPU using the push button on the rear of the box.
b Display monitor
c Printer
2 At the password: prompt type in your assigned password and press Return. Use Delete to
correct any typing errors before pressing Return.
After several seconds, the Main Window appears.
3
Turn on the power to the instrument.
232