Navigating Through Fovs; Using The Mouse To Navigate; Using The Foot Pedal To Navigate - BD FocalPoint GS User Manual

Perform additional offsets as needed.
The Offset button must be disabled when starting the calibration
In the event the unique object in the Location Confirmation FOV is markedly out of alignment,
consider a complete re-calibration. On the right side of the control panel select Slide. This
returns the user to the Slide Selection window. Select Calibration and start over (making sure
the Offset button is disabled).
3.5

Navigating Through FOVs

Remember, the Review button enables FOV review. If the slide has been successfully processed
on the BD FocalPoint™ Slide Profiler and FOV images are available, the system enables the
review mode.
Use the mouse, foot pedal or Navigation buttons to navigate to each FOV as described below.
3.5.1

Using the Mouse to Navigate

Mouse
Action
3.5.2

Using the Foot Pedal to Navigate

Clicking the foot pedal moves the stage forward to the next FOV in sequence.
NOTE
process, or if need be, the recalibration process.
Function Performed
Move the mouse wheel
backward to move to the
previous field
Move the mouse wheel
forward to advance to
the next field
Table 3-3 – Mouse action functions
NOTE
The foot pedal is an optional accessory.
Mouse
Function Performed
Action
While depressing the
left-mouse button,
move the mouse
wheel backward to go
back to the first field
While depressing the
left-mouse button,
move the mouse
wheel forward to go
to the last field
Guided Screening
31