5
The Review action indicators.
A black box indicates that the corresponding slide has the action Review/Process Review/
review slide must be reviewed on the BD FocalPoint™ GS Review Station.
. A
Rerun/Empty
Process Review
and Rerun slides must be manually screened.
6
The results for each slide. This includes:
•
Action required— Review/Process Review/Rerun/Empty . (For additional information, see
Section .)
•
Specimen Adequacy
•
Squamous cells—Detected/Insufficient
•
Endocervical cells—Detected/Insufficient
•
Inflammation/Obscuration—less than 50% (Satisfactory), between 50–75% (SBLB), or
greater than 75% (Unsatisfactory).
•
Ranking information. All successfully processed slides having an action of Review or QC
Review
receive a group (or quintile) ranking, an individual ranking within the print set,
and each individual rank expressed as a percentage of the total of all Review slides.
•
For the group ranking, slides are assigned to a numerical quintile between 1 and 5.
Within the print set, the 1st quintile contains the 20% of slides most likely to contain
abnormalities, the 2nd quintile contains the 20% of slides next most likely to contain
abnormalities, and so on, with the 5th quintile containing the 20% of the slides least likely
to contain abnormalities.
•
Each slide receives an individual rank from 1 to n, where a rank of 1 indicates a slide
most likely to contain abnormality and n is the slide least likely to contain abnormality
(n is the number of Review slides in a print set, minus the scant cellularity slides). For
example, the second slide listed on this report received an individual rank of 33/109, or
33 out of 109. For additional details, see Section 10.4.1.
•
The percentage value is the individual rank expressed as a percentage of the total of n.
7
Process Status: A message appears in this area indicating the status of the scan. The
message most likely to be seen is Scan Completed . However, when slides are rejected, or
the scanning process did not complete, a reason is printed under the Message column of the
report. See Section 21, for a list of these messages and the reasons they appear.
8
Process Date: This area provides the date and the time the slide was processed.
Using BD FocalPoint™ Slide Profiler Reports
115