Table of Contents
Advertisement
11.1.2
Instrument Icons
The Instrument Icons appear on the left side of the screen as shown in Figure 11-3):
I
The Instrument Icons contain the instrument name, instrument number, its status (Active/Not
Active), and processing status (OK, Door Open, Hopper Full, Hopper Empty, Paused, No
Response, Error). When printing reports, the status for the instrument button should always be
Active.
A Home button to the right of the instrument bar indicates which instrument screen is in use and
can be used to return to the Main Window.
See Section 15, Main Window Operating the BD FocalPoint™ Slide Profiler, for detailed
information on the Main Window instrument icons.
11.1.3
Instrument Status
The section below the Home button lists the following information (See Figure 11-4):
•
Instrument Name: prior to installation, the instrument is assigned a unique name.
•
Intended Use: identifies the method of instrument operation.
•
Operating Mode: indicates the type of slide the system is processing.
•
Auto Printing: indicates whether or not auto printing is enabled or disabled. If enabled,
indicates what type of auto printing is enabled.
•
Unreported Qualified Slides: lists unreported slides by type.
Figure 11-3 – Instrument Icons
Figure 11-4 – Main Window Instrument Status field
The BD FocalPoint™ Slide Profiler Main Window
101
Advertisement
Table of Contents
Troubleshooting
