General Warnings And Cautions - BD FocalPoint GS User Manual

15.1

General Warnings and Cautions

Observe the following general warnings and cautions while operating the BD FocalPoint™ Slide
Profiler. Other, more specific warnings and cautions appear throughout this section and
elsewhere in the manual.
POSITIONED IN SUCH A MANNER THAT BOTH, THE POWER
SWITCH AND THE AC INPUT ARE EASILY ACCESSIBLE TO
THE OPERATOR AT ALL TIMES. UNPLUG THE SUPPLY CORD
FROM THE MAIN CIRCUIT TO DISCONNECT THE DEVICE.
PROTECTION PROVIDED BY THIS EQUIPMENT MAY BE
IMPAIRED IF IT IS USED IN A MANNER NOT CONSISTENT
GROUNDED AT ALL TIMES. TO ENSURE THAT THE POWER
ELECTRICAL CURRENT RATINGS, ONLY USE THE CORD AND
POWER STRIP SUPPLIED WITH THE UNIT, OR AS PROVIDED
SHOCK AND FIRE POTENTIAL FROM SPILLED LIQUIDS. DO
NOT PLACE CONTAINERS WITH LIQUIDS ON THE DEVICE OR
THE WORKSTATION CART. DO NOT SPILL LIQUIDS ON THE
SYSTEM; FLUID SEEPAGE INTO INTERNAL COMPONENTS
CREATES A POTENTIAL SHOCK AND FIRE HAZARD. SHUT
DOWN THE DEVICE, DISCONNECT FROM THE POWER
SOURCE AND WIPE UP ALL SPILLS IMMEDIATELY. DO NOT
OPERATE THE SYSTEM IF INTERNAL COMPONENTS HAVE
WARNING
THE BD FOCALPOINT™ SLIDE PROFILER MUST BE
WARNING
WITH THE INSTRUCTIONS IN THIS MANUAL.
WARNING
THE BD FOCALPOINT™ SLIDE PROFILER MUST BE
CORD AND OUTLET STRIP HAVE THE REQUIRED
WARNING
BEEN EXPOSED TO FLUID.
Operating the BD FocalPoint™ Slide Profiler
BY BD.
137