BD FocalPoint GS User Manual page 154

BD FocalPoint™ GS Imaging System Instrument User's Manual
4 From the BD FocalPoint™ Slide Profiler Main Window, choose Utilities†Shutdown. A
window similar to the one shown in Figure 15-14 appears asking for a password. Type your
password and click on OK.
To cancel the shutdown request and return to the Main Window, click on the Cancel button.
At this point the system components may be powered down as described in the following steps.
It is important to power down the system components exactly in
1 Shut off the BD FocalPoint™
instrument from I to 0.
2 Turn off the printer by pressing the switch from I to 0.
3 Turn off the modem or router by pressing the rocker switch on the rear panel from I to 0.
4 Turn off the monitor by pressing the push-button at the lower right corner of the monitor case.
154
Figure 15-14 – Password window
CAUTION
the order shown below:

instrument by turning the switch at the bottom right of the