BD FocalPoint™ GS Imaging System Instrument User's Manual
11.1.4
Processed Slides
This section, located below Instrument Status, includes the following information
(See Figure 11-5):
Slide Information
The Main Window displays a list of processed slides that includes the following information about
each processed slide:
•
Barcode number of the tray (Tray ID)
•
Slide position in the tray (Pos)
•
Date and time the slide was processed (Date)
•
Barcode number of the slide (Slide ID)
•
Mode (indicates the type of slide the system is processing).
•
Status designation of each slide. A series of dashes (--------) indicates that either the slide
has not finished processing, the tray has not gone through System Integrity (SI), or the slide
barcode could not be read. Fully processed slides receive one of the following action
designations:
Qualified
Poor Focus
Process Review
Rerun
Empty
See Monitoring the Instrument During Processing in Section 15 for detailed information on how
to monitor the progress of slide processing.
11.1.5
Task Buttons
There are three task buttons located in the lower portion of the BD FocalPoint™ Slide Profiler
Main Window: Report, Reprint, and Utilities (see Figure 11-6).
102
Figure 11-5 – Main Window Processed Slides field
Figure 11-6 – Main Window Task Buttons