Selecting Qc Review Report Options - BD FocalPoint GS User Manual

If this is the first time defining reports, refer to Section 12 and view the various examples of
reports illustrated there.
Additional instructions for defining a QC Review report appear in Selecting QC Review Report
Options (Section 14.2).
To define a report:
1 To display the Report Type drop down menu click the Report icon in the Main Window.
2 Choose the desired report from the Report Type area using the methods described below. (A
combination of the mouse and the keyboard methods can be used.)
Using the Mouse
Hover the mouse over the Report Type drop down menu so it is highlighted. Click on the drop
down menu arrow or the name of the desired report to show the report types. Click on the
desired report type. To deselect the report, select a different report type in the drop down
menu. When a report is selected, the report name is featured next to Report Type.
Using the Keyboard
Press the Tab key until the report name field next to Report Type shows an outline. Use the
Down arrow keys to move up and down in the report type list and then use the
Up and
Spacebar to select and deselect the report type. To move from one area to another, use the
Tab key. To move backwards in the window, press the Shift-Tab keys.
3 Tab to the Sort Order area and select a sort order option. For additional information on
choosing the appropriate options, see Section 12.2.2.
4 Tab to the Layout area and select a layout option. For additional information on choosing the
appropriate options, see Section 12.2.3.
5 When finished, click on the OK button to add the defined report to the Report Options list.
Each time a report is added to this list, it appears at the bottom of the list. To remove a report
from this list, select the report name in the Reports Window and click on the Remove button.
6 Follow the above steps to define as many reports as needed. When finished, click on the
BACK button to store the defined reports. All reports now appearing on the Reports List will
automatically print when Print is selected from the Report window.
To discard clicking Remove, select the Cancel button—this returns to the Reports window.
Click on the Help button to view online help information.
14.2

Selecting QC Review Report Options

To ensure that the BD FocalPoint™ Slide Profiler and your laboratory process are performing
within the parameters defined in the product labeling (see product insert), a manual QC rescreen
of at least 15% of the slides interpreted as NILM should be performed. Section 19.2, describes
the BD-recommended method for compliance with these requirements.
The QC reports to print are defined at the same time as other reports are defined
(see Section 14.1.2). These QC reports are then printed at the same time as other defined
reports. QC Review reports are available sorted by barcode, rank, and date. Various layouts can
also be selected. See Section 12 for an example of these reports and a complete description of
their contents.
Setting BD FocalPoint™ Slide Profiler Report Options
133