NEC V850E/RS1 User Manual page 599

(b) Write
Clear VALID
Set PSMODE0 Clear PSMODE0
Set PSMODE1 Clear PSMODE1
Set OPMODE0
Set OPMODE1
Set OPMODE2
Downloaded from Elcodis.com electronic components distributor
Figure 16-28: CAN Module Control Register (CnCTRL) Format (4/4)
Set AL Clear AL
0 1 AL bit is cleared to 0.
1 0 AL bit is set to 1.
Other than above AL bit is not changed.
0 VALID bit is not changed.
1 VALID bit is cleared to 0.
0 1
1 0
Other than above
0 1
1 0
Other than above
Clear OPMODE0
0 1
1 0
Other than above
Clear OPMODE1
0 1
1 0
Other than above
Clear OPMODE2
0 1
1 0
Other than above
User's Manual U16702EE3V2UD00
Chapter 16 FCAN Controller
Setting of AL bit
Setting of VALID bit
Setting of PSMODE0 bit
PSMODE0 bit is cleared to 0.
PSMODE bit is set to 1.
PSMODE0 bit is not changed.
Setting of PSMODE1 bit
PSMODE1 bit is cleared to 0.
PSMODE1 bit is set to 1.
PSMODE1 bit is not changed.
Setting of OPMODE0 bit
OPMODE0 bit is cleared to 0.
OPMODE0 bit is set to 1.
OPMODE0 bit is not changed.
Setting of OPMODE1 bit
OPMODE1 bit is cleared to 0.
OPMODE1 bit is set to 1.
OPMODE1 bit is not changed.
Setting of OPMODE2 bit
OPMODE2 bit is cleared to 0.
OPMODE2 bit is set to 1.
OPMODE2 bit is not changed.
599