Mircom FLeXNet FX-MNS-6000 Installation And Operation Manual page 141

Appendix I: Configuration Example Setup
ULC Configurations (changes to satisfy ULC requirements)
Hardware changes required for ULC compliance:
48 LED adder (RAX-1048TZDS) was changed to 48 switch adder (IPS-4848DS). The IPS-4848DS is represented
by two 24 SW Adder in the configurator.
In order to modify an existing job for ULC, you can create a new job and change the agency to ULC and then
copy current job date to it. Here is a capture.
132