Duo Loop Enabling/Disabling - btsr MATRIX CUBE Operating Manual

DUO LOOP enabling/disabling

This function allows you to either enable or disable the DUO LOOP function, i.e. the function that
allows adjusting the yarn tension on TS55 sensors in order to keep it consistent with the yarn
tension on DIAPER FEEDER devices, corresponding to the tension value programmed on
TENSION SET POINT
If the function is disabled, then the only reference tension is the one on DIAPER FEEDER devices;
in this case you are kindly recommended to reload the style with a lower value of
POINT.
parameter (please refer to the "Style Programming" paragraph).
Enter the
Select
Select
(function disabled).
SAVE
BACK
EXIT
MATRIX CUBE
DUO LOOP enabling/disabling
SETUP
SETUP menu.
DUO LOOP.
ENABLED (function enabled) or
to save the configuration,
to return to the previous screen without saving,
to return to menu.
→ DUO LOOP
TENSION SET
DISABLED
- 44 -