btsr MATRIX CUBE Operating Manual page 113

DIAPER FEEDER Troubleshooting and Maintenance
Indications Provided by the Red LEDs on DIAPER FEEDER Device
Status of DIAPER FEEDER
device
Identification
ERROR E2
MOTOR LOCKED
(with CONTROL (+) button)(*)
TENSION ERROR
(*) This condition is obtained when you are working with the tension defined in P2. If you are working with
the tension defined in P1, even if you press the Control (+) button, the LEDs remain off. However,
pressing the Control button, the tension defined in P1 will be displayed.
To interpret the failure condition and restore the normal operating conditions, please refer to the
following table.
Led on the TS44.. sensor
BLINKING
BLINKING
ON
BLINKING
MATRIX CUBE
DIAPER FEEDER Device
GREEN/RED ALTERNATE
FLASHING
GREEN/RED ALTERNATE
FLASHING
ON
GREEN/RED ALTERNATE
FLASHING
- 93 -