Running Samples
Figure 75. Select other Statistical Parameters
For details about statistics, please refer to the
NOTE
Append Data
Additional data can be acquired for samples which already include data. Newly
acquired data will be appended to the existing data for the sample.
1
Select the sample to be the Active Sample. Set the Stop Condition for the
acquisition.
2
Load the sample into the sample holder.
3
Click Run button in the Cytometer Control panel. If the sample already
contains data, a dialog box will pop up. Click the Append button to add more
data to the sample. Click the Overwrite button to delete the existing data and
re-collect the data.
NovoCyte Quanteon Flow Cytometer Operator's Guide
NovoExpress Software
Guide.
101