Novocyte Fluidics Cart (Optional); Novosampler Q (Optional) - Agilent Technologies NovoCyte Quanteon Operator's Manual

Introduction
Figure 22. NovoCyte Fluidics Station II with Pressure Sensor underneath Each Reagent Container
Please ensure that the container position in the NovoCyte Fluidics Station II is
NOTE
correct (see Figure 22 and the label on the container). A similar label can be
found on the left side of the NovoCyte Fluidics Station II as well. The containers
are color coded to match the illustrated position as well.
Use caution to gently place the containers back into the NovoCyte Fluidics
CAUTION
Station II to avoid damaging the pressure sensors.

NovoCyte Fluidics Cart (Optional)

Agilent flow cytometer can also be connected to optional NovoCyte Fluidics Cart
with larger NovoFlow and Waste volume capacity. The NovoCyte Fluidics Cart
comes with one NovoFlow sheath fluid container (15 L), one NovoRinse solution
container (500 mL), one NovoClean solution container (500 mL), and one waste
container (15 L). For ordering information, please visit
Agilent sales representative. For details about NovoCyte Fluidics Cart, please refer
to the

NovoSampler Q (Optional)

Agilent flow cytometer can also be connected to optional NovoSampler Q for
automatic collection of multiple samples from a microtiter plate, or from 12 × 75
mm tubes using an Agilent Flow Cytometer 40 tube rack. For ordering information,
NovoCyte Quanteon Flow Cytometer Operator's Guide
NovoCyte Fluidics Cart Operator's
www.agilent.com
Guide.
or contact
49