Turn On Workstation - Agilent Technologies NovoCyte Quanteon Operator's Manual

Instrument Operation
Unplug the power cord immediately under emergent situation (e.g. electric
WARNING
shock).
During the initialization process, the instrument conducts an automatic cleaning
NOTE
process, warms up the lasers, and prepares the instrument to be Ready for running
samples.
User can also schedule automatic instrument power on or off at selected time and
NOTE
frequency by clicking Schedule Power On & Off from the Operation panel. Please
refer to

Turn on Workstation

1 Turn on the NovoCyte Workstation and monitor.
2 When ready, double-click the NovoExpress software icon
desktop to launch NovoExpress software.
3 When prompted, select your username and log in. The software should display
connected, and that the instrument is in the initialization process. The
initialization process takes several minutes. After completion, the status bar
will display
If the software displays a black icon
NOTE
not properly connected to the workstation. Check the USB cable between the
instrument and the workstation and secure the connection. Then restart the
NovoExpress software or workstation.
If more than one or multiple NovoExpress software is open on the NovoCyte
NOTE
Workstation with the instrument connected, only the software opened first will
connect with the instrument when it is on. The other opened software will not
connect with the instrument and the black icon
bar. If the instrument is turned on but you observed the black icon
NovoExpress status bar, check if there are multiple copies of NovoExpress
software opened at the same time.
58
NovoExpress Software Guide
Initializing on the status bar, which indicates that the instrument is properly
Ready, indicating that the instrument is ready to use.
NovoCyte Quanteon Flow Cytometer Operator's Guide
for more details about this function.
in the status bar, it means the instrument is
will be displayed in the status
on the workstation
in the