Table of Contents
Advertisement
System Maintenance
Figure 94. Software Message Instructing to Conduct Priming after Replacing Fluidic System
Consumables
During the Priming procedure, the progress of the Priming will be shown below in
the NovoExpress software.
Figure 95. Software Message Indicating the Progress of Priming
The Priming procedure can also be manually initiated by clicking Instrument >
NOTE
Fluidics Maintenance > Priming on the NovoExpress software when the instrument
is in Ready status.
116
NovoCyte Quanteon Flow Cytometer Operator's Guide
- Quick Links:
- Fluidics System
Hide quick links:
Advertisement
Table of Contents
