Export Files Screen - Agilent Technologies Magnis NGS Prep System User Manual

Table 10 Settings screen buttons (continued)
Button
Firmware Update
Other Settings

Export Files screen

Purpose: To export post run data files, system logs, error logs, and debug logs.
To open: From the Home screen, press Settings. On the Settings screen press Export.
Figure 41 Export Files screen
File folders
The panel on the left of the screen lists the folders from which you can export files. The folders are
described below.
• Post run data folder: Contains data files for completed runs.
In the RunData folder, subfolders are organized by user account, then by year, then numerically
by month. For file export, select the desired subfolder; the system will export all post run data
files in that folder.
• System Log folder: Contains log files of system-level actions, such as powering on of the
instrument and diagnostic tests.
• Error Log folder: Contains log files of system errors.
• Debug Log folder: Contains log files of debugging actions. The files are organized by
instrument module into separate subfolders.
Browser
The panel on the right of the screen is a browser. Use the browser to navigate to the desired
folder.
Magnis and Magnis Dx NGS Prep System User Guide
Description
Opens the "Firmware Update screen"
firmware software from a connected USB disk drive or by connecting to the
Agilent website.
Opens the "Other Settings screen"
during the IHC.
for installing a new version of the
which has a setting to verify teach points
65