Novocyte Workstation And Monitor - Agilent Technologies NovoCyte Quanteon Operator's Manual

Introduction
Table 5
Power Switch
Light
LED Status
Indicator
If warnings or errors occur, follow the instructions in the prompted dialog box, and
NOTE
refer to
The instrument back side (Figure 19) has a power port, four communication ports
and five fluidic connection ports. The power port is used to supply the power to the
instrument through provided power cord. The communication ports are used to
communicate the instrument with NovoCyte Workstation, NovoCyte Fluidics
Station II and other accessories (e.g. NovoSampler Q). The fluidics connection
ports are used to connect the instrument with instrument reagent containers.
Please refer to
Figure 19. NovoCyte Quanteon Instrument (Rear View)

NovoCyte Workstation and Monitor

NovoCyte Quanteon flow cytometer comes with NovoCyte Workstation (i.e.
desktop or laptop computer), a monitor and associated accessories. Microsoft
Windows operating system, Microsoft Office, and NovoExpress software are
preinstalled on NovoCyte Workstation. For more details about the NovoCyte
Workstation, please refer to the computer supplier's website. For details about the
46
Power Switch Light and LED Status Indicator Information
Steady green
Flashing green
Green
Orange
Red
Troubleshooting in this guide for troubleshooting methods.
Installation in this guide for more details.
NovoCyte Quanteon Flow Cytometer Operator's Guide
Instrument is powered on.
Instrument is performing the shutdown cleaning procedure.
Normal status.
Warning. Click on the status bar in the NovoExpress software
to review the warning message.
Errors. Click on the status bar in the NovoExpress software to
review the error message.