Introduction
Figure 1.
The bandpass filters are usually placed at a 90° angle relative to the incident light
and regulate the incident light. The transmitted light travels in the same direction
as the incident light (λ2), whereas the reflected light is reflected in a 180° angle
relative to the incident light (λ1 and λ3) (Figure 2).
Figure 2.
Refer to
NOTE
Longpass Filters
•
Longpass (LP) filters pass wavelength longer than the cutoff wavelength. For
example, a 505 nm LP filter allows wavelengths longer than 505 nm to pass
through it and either absorbs or reflects wavelengths shorter than 505 nm as
shown in Figure 3.
NovoCyte Quanteon Flow Cytometer Operator's Guide
Longpass Filter and Shortpass Filter
Bandpass Filter
Appendix A
in this guide for list of the optical filters used for your product.
31