General Safety - Agilent Technologies NovoCyte Quanteon Operator's Manual

Prologue
instrument may be damaged if it is operated under any conditions that are not
described in this guide.

General Safety

The following general safety precautions must be observed during all phases of
operation of Agilent flow cytometer and associated accessories. Failure to comply
with these precautions or with specific warnings or operation instructions in the
operator's guide violates safety standards of design, manufacture, and intended
use of the instrument. Agilent Technologies assumes no liability for the customer's
failure to comply with these requirements.
Do not use this product in any manner not specified by the manufacturer.
CAUTION
The protective features of this product may be impaired if it is used in a
manner not specified in the operation instructions.
Before applying power, verify that all safety precautions are taken according
WARNING
to the operator's guide of the individual instrument. Verify that the voltage
range and frequency of your power distribution matches to the power
specification of the individual instrument. Never use cables other than the
ones supplied by Agilent Technologies to ensure proper functionality and
compliance with safety or EMC regulations. Make all connections to the unit
before applying power. Note the instrument's external markings are
described in
If your product is provided with a grounding type power plug, the instrument
WARNING
chassis and cover must be connected to an electrical ground to minimize
shock hazard. The ground pin must be firmly connected to an electrical
ground (safety ground) terminal at the power outlet. Any interruption of the
protective (grounding) conductor or disconnection of the protective earth
terminal will cause a potential shock hazard that could result in personal
injury. Please refer to
information.
NovoCyte Quanteon Flow Cytometer Operator's Guide
Table 3 of this guide.
Electrical Safety of this guide for additional
17