Registration Transport Assembly (PL 9.1.9)
1.
Remove the Print Cartridge (page 8-4) and protect it from light.
2.
Remove the Top Cover Assembly (page 8-9).
3.
Disconnect the connector from the Registration Sensor.
4.
Remove the 4 screws that secure the Registration Transport Assembly to the
chassis.
5.
Lift up on the latch handle at the front and remove the gear cap (item 1) at the
right end of the Registration Transport Assembly.
Note
The gear cap is the same color black as the printer frame and can be difficult
to see. Look at the right end of the Registration Transport Assembly and you
will see the cap just to the right of the bearing.
8-30
1
Phaser 3425 Laser Printer Service Manual
-
-