RRP 20 Registration Transport Assembly
Figure 7-21 Registration Transport Assembly
Note
Turn the printer power Off and unplug the power cord.
Removal
1.
Partially remove the MPT.
2.
Remove the two screws from the plastic flanges that secure the assembly
in the printer frame using a stubby screwdriver.
Caution
Note the wiring harness routing in the above figure. Make
certain the wires are routed behind the black plastic
cover on the Registration Transport Assembly.
3.
Disconnect the wiring harness.
4.
Remove the registration transport assembly.
Phaser 7700 Color Laser Printer Service Manual
7-175