Modeler Setup - Insight
Configure Your Modeler
The first step in preprocessing is to configure your modeler.
1.
Click the Modeler button
side of screen) of the Operations Panel. The Configure Modeler dialog box
opens. You can also access the Modeler Setup window by selecting
Modelers>Setup.
Options Icon
Save Settings
2.
Select your modeler from the Modeler Field.
3.
Select a modeling material (the Support Material field is automatically filled).
See
4.
Select a model tip size (the Support Tip field and the Slice Height field is
automatically filled in).
(Figure
Figure 5-2: Configure the Modeler
"Liquefier Tips" on page 3-9
located in the Modeler Setup window (right
5-2)
for modeler/tip compatibility.
5-2
Cancel Changes