Printer Setup; General Information; Weight And Dimensions; Stratasys Required Additional Equipment - Stratasys H350 User Manual

General Information

2 PRINTER SETUP

This chapter describes basic setup of the H350 SAF Selective Absorption Fusion Powered 3D
Printer.
General Information

Weight and Dimensions

The approximate net weights and dimensions of the printer modules are provided below.
Printer (cover closed)
Removal box
Printer height is based on an installation height of 130 mm (5.1 in.) from the floor to the bottom
surface of the printer.

Stratasys Required Additional Equipment

The following kits and individual items are required purchasing for any H350 printer owner.
Part Number
X3D-01011
X3D-01338
X3D-01001
X3D-01330-S
X3D-01016-S
X3D-01017
X3D-01006-V
X3D-01007
Table 1: Net size (Length, Width, Height) and weight
Dimensions (mm)
Module (Length x Width x
1900 x 940 x 1767.3)
380 x 290 x 395
Mandatory for
Installation
(Yes / No)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
© Copyright 2022 Stratasys. All rights reserved.
Dimensions (inches)
(Length x Width x
Height)
74.8 x 37.0 x 67.3
15.0 x 11.4 x 15.5
Table 2: Key for Figure 1
HAF - High Absorption Fluid - 4l
HAF Cleaning Bottle, pack of 6
Stratasys H350 Build Removal box
Powder scoop
Stratasys H Cleaning Kit
Stratasys H Consumables maintenance kit
Stratasys H Trolley
Stratasys H350 Powder Container
Weight and Dimensions
Weight [kg/lb]
Height)
825 / 1819
6.0 / 13.2
Description
Page 15