MODELER SETUP - INSIGHT
CONFIGURE YOUR MODELER
The first step in preprocessing is to configure your modeler.
1.
Click the Modeler button
Operations Panel. The Configure Modeler dialog box opens. You can also access the Modeler
Setup window by selecting Modelers>Setup.
Figure 5-2:
Configure the Modeler
Options Icon
Save Settings
2.
Select your modeler from the Modeler Field.
3.
Select a modeling material (the Support Material field is automatically filled). See
Compatibility" on page 18
4.
Select a model tip size (the Support Tip field and the Slice Height field is automatically filled in).
located in the Modeler Setup window (right side of screen) of the
(Figure
for modeler/tip compatibility.
63
5-2)
Cancel Changes
"Materials