Table of Contents
Advertisement
Product Guide
Material Safety
The Neo range is an open material platform. Any commercially available 355 nm photopolymer
materials, more commonly referred to as resin, can be processed. Please ensure you have the
necessary safe handling guidelines from your material supplier.
General Material Handling Safety Guidelines
Operating Conditions
When operating the UV800, always observe the following guidelines:
•
The ventilation ducts must be left uncovered to allow proper airflow in and out of the
UV800.
•
Wipe off any resin spills immediately using a cloth dampened with isopropanol.
•
Temperature range: 17-25 ˚C
•
Protect the UV800 from dust and corrosive vapours or substances.
•
Avoid strong electromagnetic fields and static electricity.
•
For further details please refer to
IRRITANT:
Always wear chemical-resistant gloves, goggles, and protective clothing when
handling material, containers, or partially cured parts.
100% nitrile gloves offer best hand protection. Latex gloves are not chemically
resistant, and are not recommended.
Always ensure good ventilation, and avoid breathing vapors
Wipe-up any spills immediately, using paper towel dampened with isopropyl alcohol
(IPA)
Use soap and cold water to wash material in contact with skin. Never use IPA or hot
water, as this will increase absorption.
Use care when handling IPA used for cleaning materials. IPA is highly flammable.
"Technical Specifications" (page
7).
Page 5
Advertisement
Table of Contents
