TOP DOOR AND TOP HOOD
Allows access to the XY Gantry, head assembly, and four cooling fans. The cooling fans cool the upper area of
the XY Gantry and head area. The two fans on the left draw cool air into the system. The two fans on the right
draw warm air out of the system.
OVEN DOOR
Allows access to the platen, tip wipe assembly, and modeled parts.
CANISTER BAY DOORS
Allows access to the material canisters, purge waste bucket, storage area, vacuum gauge, pressure gauge,
canister levers, and canister LEDs.
Warning: Turn power Off and disconnect the power cable before removing any
of the access panels.
Warning: High voltage is present in the system when the system is Off and the
power cord is unplugged. This is due to the Uninterruptible Power Supply (UPS).
Make sure you follow the correct shutdown procedure. See
System" on page
RIGHT SIDE DOOR - UPPER
Allows access to the right side Z stage components. To remove the panel, loosen the four panel retaining
screws (the screws do not have to be removed).
RIGHT SIDE DOOR - LOWER
Allows access to some of the electronic bay components such as the computer case, CD-ROM, in-line vacuum
filter, keyboard, monitor connectors, and the vacuum system. To remove the panel, loosen the four panel
retaining screws (the screws do not have to be removed).
LEFT SIDE DOOR - UPPER
Allows access to the left side Z stage components. To remove the panel, loosen the four panel retaining screws
(the screws do not have to be removed).
LEFT SIDE DOOR - LOWER
Allows access to the air compressor, material drying system, flow meter, and some electronics bay components.
To remove the panel, loosen the four panel retaining screws (the screws do not have to be removed).
32.
13
"Powering Down the