Material, Canisters, And Liquefier Tips; Unloading Material From The Liquefier Tips - Stratasys Fortus 900mc User Manual
Hide thumbs
Also See for Fortus 900mc:
- Operation and maintenance manual (72 pages) ,
- Site preparation manual (20 pages) ,
- Quick reference card (2 pages)
Table of Contents
Advertisement
The difficulty of support removal is based on the following: part size, amount of supports, support style, and
support temperature. Stratasys recommends removing the supports in the following order:
1.
Base
2.
Structures
3.
Thin horizontal sections
4.
Around small features
5.
Angle support faces
6.
Large mass sections
MATERIAL, CANISTERS, AND LIQUEFIER TIPS
UNLOADING MATERIAL FROM THE LIQUEFIER TIPS
Note: If you are changing to a different material type or changing tips, follow the
procedure outlined in
Unloading filament from the liquefiers is done in the Idle mode only, not while
building or in a paused state.
1.
Make sure the system is in the Pause or Idle mode.
2.
From the Main Menu, select Operator Tools and the following screen will appear.
Figure 4-24:
3.
Select the material to be unloaded and press the Unload icon.
A.
The head warms up to the unload temperature, and the canister LED rapidly flashes green.
"Changing Tips or Material Type" on page
Operator Tools
Unload
72
79.
Advertisement
Table of Contents
