User Manual of Thermal Network Positioning system
2. Check the checkbox of the items you want to clear.
3. Click
7.3.8 Prioritize PTZ
Steps:
1. Enter the
Prioritize PTZ interface:
Configuration > PTZ > Prioritize PTZ.
2. Select Network or RS-485 from the dropdown list
3. Set the delay time (Range 2-200s).
4. Click
7.3.9 Position Settings
Steps:
1. Enter the Position Settings interface:
Configuration > PTZ > Position Settings.
The actual interface may vary from model to model.
© Hikvision
to clear the settings.
Figure 7-36 Position Settings
to save the settings.
102