Configuring Smoke Detection Shield - HIKVISION DS-2TD8166-180ZE2F-V2 User Manual

User Manual of Thermal Network Positioning system
7. Click Add to save the smoke detection shield, and it will be listed in the Fire Source
Detection Shield List area; you can select a region and click Delete to delete it from
the list; you can also define the color of the regions.
8. Check the checkbox of Enable Fire Source Detection Shield to enable this function.
You are allowed to draw up to 24 areas on the same image.
9. Click

5.3.4 Configuring Smoke Detection Shield

Purpose:
Smoke Detection Shield enables you to shield certain areas from being detected in smoke
detection.
The smoke detection shield function is supported by the optical lens only.
Steps:
1. Enter the Smoke Detection Shield Setting interface:
Configuration > Event > Smart Event > Smoke Detection Shield
© Hikvision
to save the settings.
Figure 5-23 Smoke Detection Shield
55