Table of Contents
Advertisement
User Manual of Thermal Network Positioning system
121
Select the Time Zone
Purpose:
When the positioning system is taken to another time zone, you can use the Time Zone
function to adjust the time. The time will be adjusted according to the original time and the
time difference between the two time zones.
From the Time Zone dropdown menu as shown in Figure 7-62, select the Time Zone in
which the positioning system locates.
Figure 7-62 Time Zone Settings
Configuring DST (Daylight Saving Time)
Purpose:
If there is the habit of adjusting clocks forward in your country in certain time period of a
year, you can turn this function on. The time will be adjusted automatically when the
Daylight Saving Time (DST) comes.
Steps:
1. Enter the DST interface by Configuration > Advanced Configuration > System > DST
Figure 7-63 DST Settings
2. Check
to enable the DST function.
3. Set the date of the DST period.
4. Click
to save the settings.
Configuring RS-485
Purpose:
The RS-485 serial port is used to control the PTZ of the camera. The configuring of the
PTZ parameters should be done before you control the PTZ unit.
Steps:
1.
Enter RS-485 Port Setting interface:
Configuration> Advanced Configuration> System > RS-485
© Hikvision
Advertisement
Table of Contents
