HIKVISION DS-2TD8166-180ZE2F-V2 User Manual page 118

User Manual of Thermal Network Positioning system
 Sodium Lamp
You can select this mode when there are sodium lamps installed near the positioning
system.
 Auto-Tracking
In Auto-Tracking mode, white balance is continuously being adjusted in real-time
according to the color temperature of the scene illumination.
This function varies depending on the models of positioning system.
Image Enhancement
This function varies depending on the models of positioning system.
 3D Digital Noise Reduction
You can set Digital Noise Reduction function to Normal and adjust the Noise
Reduction Level as shown in Figure 7-47. The level ranges from 0 to 100.
If you are a professional technician, you can set it to Expert Mode then adjust Space
DNR Level and Time DNR Level. The level ranges from 0 to 100.
 Defog Mode
You can set the Defog Mode to ON or OFF as you need.
EIS (Electronic Image Stabilization)

You can set theEIS to ON or OFF as you need.
© Hikvision
Figure 7-47 3D Digital Noise Reduction
Figure 7-48 Expert Mode
Figure 7-49 Defog Mode
Figure 7-50 Electronic Image Stabilization
110