Table of Contents
Advertisement
User Manual of Thermal Network Positioning system
82
7.1.2 Advanced Settings
Configuring SNMP Settings
Purpose:
You can use SNMP to get positioning system status and parameters related information.
Before you start:
Before setting the SNMP, please use the SNMP software and manage to receive the
positioning system information via SNMP port. By setting the Trap Address, the
positioning system can send the alarm event and exception messages to the surveillance
center.
The SNMP version you select should be the same as that of the SNMP software.
Steps:
1. Enter the SNMP settings interface:
Configuration > Network > Advanced Settings > SNMP
Figure 7-10 SNMP Settings
© Hikvision
Advertisement
Table of Contents
