HIKVISION DS-2TD8166-180ZE2F-V2 User Manual page 71

User Manual of Thermal Network Positioning system
b) Set the alarm rule.
c) Set the Alarm Temperature, Pre-Alarm Temperature, and Tolerance
Temperature.
E.g., select Alarm Rule as Min. Temperature is Lower than, and set the Alarm
Temperature to 40 ° C, and the device alarms when the minimum temperature is
lower than 40 ° C.
For Frame Rule:
Task 1.
a) Click
b) Set the alarm rule.
c) Set the Alarm Temperature, Pre-Alarm Temperature, and Tolerance
Temperature.
E.g., select Alarm Rule as Temperature Difference is Higher than, and set the
Alarm Temperature to 10 ° C, and the device alarms when the difference
between the minimum temperature and the maximum temperature of the
region is higher than 10 ° C.
© Hikvision
Figure 5-29 Alarm Rule Settings (Line)
to show the Alarm Rule setting interface.
Figure 5-30 Alarm Rule Settings (Frame)
63