Table of Contents
Advertisement
User Manual of Thermal Network Positioning system
(2) Click
The Server Address should be entered with the static IP address of the computer that
runs the IP Server software. For the IP Server, you have to apply a static IP, subnet
mask, gateway and preferred DNS from the ISP.
HiDDNS:
Steps:
(1) Enter the Server Address.
(2) Enter the Domain name of the camera. The domain is the same with the device
alias in the HiDDNS server.
(3) Click
NO-IP:
Steps:
(1) Enter Server Address of NO-IP.
(2) In the Domain text field, enter the domain name obtained from the NO-IP website.
(3) Enter the Port of NO-IP server.
(4) Enter the User Name and Password registered on the NO-IP website.
(5) Click
Configuring PPPoE Settings
Purpose:
© Hikvision
to save the settings.
Figure 7-5 IPServer Settings
to save the settings.
Figure 7-6 HiDDNS Settings
to save the settings.
79
Advertisement
Table of Contents
