Table of Contents
Advertisement
User Manual of Thermal Network Positioning system
7.4 Configuring Image Settings
On the event configuration page, click
hide it.
Click the direction buttons to control the pan/tilt movements.
Click the zoom/iris/focus buttons to realize lens control.
The functions vary depending on the models of positioning system.
7.4.1 Configuring Display Settings
Purpose:
You can set the image quality of the positioning system, including brightness, contrast,
saturation, sharpness, etc.
The parameters in Display Settings interface vary depending on the models of
positioning system.
You can double click the live view to enter full screen mode and double click it again
to exit.
Steps:
1. Enter the Display settings interface:
Configuration > Image> Display Settings
2. Select the channel No. from the dropdown list.
3. You can select the Scene in the dropdown list with different predefined image
© Hikvision
to show the PTZ control panel or click
Figure 7-39 Display Settings
105
to
Advertisement
Table of Contents
