Table of Contents
Advertisement
User Manual of Thermal Network Positioning system
plane. The traversing direction can be set as bidirectional, from left to right or from right to
left. The alarm will be triggered if the rule is broken.
Steps:
1.
Create new rule: Click on the button
2.
Select rule type: Click the dropdown menu and select Line Crossing as the rule type.
3.
(Optional) Configure the size filter, if you want to narrow the detection target to a
desired range.
a.
Check the checkbox of the Filter by, and only filer by pixel is available.
b.
Click the
size filter.
c.
Click the
size filter.
4.
Configure the rule area:
Click
on the tool bar of the live view panel. Specify a point of the line by clicking
the mouse on the live view image, and then specify the other one.
© Hikvision
to add a new rule.
Figure 6-9 Select Rule Type
button and draw a rectangle on the live view image as the Min.
button and draw a rectangle on the live view image as the Max.
72
Advertisement
Table of Contents
