Table of Contents
Advertisement
User Manual of Thermal Network Positioning system
You can check the Enable Dynamic Analysis for Motion checkbox if you want the
detected object get marked with rectangle in the live view.
4.
Select the configuration mode as Normal or Expert and set the corresponding motion
detection parameters.
Normal
Steps:
(1) Click
detection area.
(2) Click
You can draw up to 8 motion detection areas on the same image.
You can click
(3) Move the slider
sensitivity of the detection.
Expert
© Hikvision
Figure 5-9 Motion Detection Settings-Normal
and drag the mouse on the live video image to draw a motion
to finish drawing.
to clear all of the areas.
42
to set the
Advertisement
Table of Contents
