User Manual of Thermal Network Positioning system
4.4.5 One-touch Patrol
Purpose:
One-touch patrol is an automatically created patrol. The system automatically add preset
No.1 to No.32 to the patrol path 8. You can call the one-touch patrol and the positioning
system moves as the patrol path 8 automatically.
Steps:
1. Set preset No.1 to No.32. Refer to 4.4.3 Setting / Calling a Preset for detailed
information of setting preset.
2. Call preset No. 45, and the positioning system moves as patrol path 8.
3. Click
to enter the patrol settings interface and start/stop one-touch patrol, edit
the patrol time and the speed.
4. You can click
4.4.6 Setting / Calling a Pattern
Purpose:
A pattern is a memorized series of pan, tilt, zoom, and preset functions. It can be called on
the pattern settings interface. There are up to 4 patterns for customizing.
Pattern function varies depending on positioning system models.
Setting a Pattern:
Steps:
1. In the PTZ control panel, click
2. Select a pattern number from the list as shown in Figure 4-12.
© Hikvision
of the PTZ control panel to start one-touch patrol.
Figure 4-11 Patrol Path 8
to enter the pattern settings interface.
29