Table of Contents
Advertisement
User Manual of Thermal Network Positioning system
Steps:
1. Enter the HTTPS settings interface.
Configuration > Network > Advanced Settings > HTTPS
2. Create the self-signed certificate or authorized certificate.
OPTION 1: Create the self-signed certificate
1)
Select Create Self-signed Certificate.
2)
Click Create to create the following dialog box.
3)
Enter the country, host name/IP, validity and other information.
4)
Click OK to save the settings.
OPTION 2: Start the installation when signed certificate is available.
1)
Select Signed certificate is available, Start the installation directly.
2)
Click Browse to upload the available certificate.
3)
Click Install button to install the certificate.
4)
Click OK to save the settings.
OPTION 3: Create certificate request first and continue the installation.
1) Select Create certificate request first and continue the installation.
2) Click Create to create the certificate request, and fulfill the required information.
3) Download the certificate request and submit it to the trusted certificate authority
for signature.
4) After receiving the signed valid certificate, import the certificate to the device.
5) Click OK to save the settings.
© Hikvision
Figure 7-16 Create Certificate
Figure 7-17 Create Self-signed Certificate
87
Advertisement
Table of Contents
