Prioritize Ptz - HIKVISION E Series User Manual

User Manual of E Series Network Speed Dome
Configuration > PTZ > Smart Tracking
2. Check the
3. Click the PTZ buttons to select an object.
4. Click
5. Set the tracking duration. The speed dome stops tracking when the duration time is up. The
duration ranges from 0 to 300 seconds.

Setting the duration to 0 means that there' no duration when speed dome tracks.

Not all the speed dome models support this function. Please take the browser interface of
the actual product as standard.

5.4.9 Prioritize PTZ

Steps:
1. Enter the Prioritize PTZ interface:
Configuration > PTZ > Prioritize PTZ.
2. Select Network or RS-485 from the dropdown list
3. Set the delay time (Range 2-200s).
4. Click
Figure 5-36
Configure Smart Tracking
check box to enable smart tracking function.
to set the current zoom ratio as the tracking zoom ratio.
Figure 5-37 Position Settings
to save the settings.
65