Table of Contents
Advertisement
User Manual of Thermal Network Positioning system
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
Receiver: Select the receiver to which the email is sent. Up to 2 receivers can be
configured.
Receiver: The name of the user to be notified.
Receiver's Address: The email address of user to be notified. (Optional: click Test to
make sure that the email server can send email out.)
3. Click
Configuring Platform Access
Purpose:
Platform access provides you an option to manage the devices via platform.
Steps:
1. Enter the Platform Access interface.
Configuration > Network > Advanced Settings > Platform Access
2. Check the checkbox of Enable to enable the platform access function of the device.
3. Select the Platform Access Mode from the dropdown list.
4. Set the Server IP.
5. Click
Configuring HTTPS Settings
Purpose:
HTTPS is consisted by SSL&HTTP. It is used for encryption transmission, identity
authentication network protocol which enhances the security of WEB accessing.
For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The
password should be something of your own choosing (using a minimum of 8
characters, including upper case letters, lower case letters, numbers and special
characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility
of the installer and/or end-user.
© Hikvision
to save the settings.
Figure 7-15 Platform Access Settings
to save the settings
86
Advertisement
Table of Contents
