Table of Contents
Advertisement
User Manual of Thermal Network Positioning system
Proper configuration of all passwords and other security settings is the
responsibility of the installer and/or end-user.
4. Click
After having saved successfully, you need to reboot the positioning system to activate
the settings.
Initialize the added network disk.
1. Enter the HDD settings interface (Configuration > Storage > Storage Management >
HDD Management), in which you can view the capacity, free space, status, type and
property of the disk.
2. If the status of the disk is Uninitialized, check the corresponding checkbox to select the
disk and click Format to start initializing the disk.
3.
When the initialization completed, the status of disk will become Normal as shown in
Figure 5-7.
Define the Quota for Record and Pictures
1. Input the quota percentage for picture and for record.
2. Click Save and refresh the browser page to activate the settings.
© Hikvision
to add the network disk.
Figure 5-6 Storage Management Interface
Figure 5-7 View Disk Status
40
Advertisement
Table of Contents
