Prioritize Ptz; Position Settings - HIKVISION UD06695B User Manual

User Manual of Network Speed Dome
5. Set the tracking duration. The speed dome stops tracking when the duration time is up. The
duration ranges from 0 to 300 seconds.

Setting the duration to 0 means that there' no duration when speed dome tracks.

This function varies depending on different camera models.
6. Click

5.4.9 Prioritize PTZ

Steps:
1. Enter the Prioritize PTZ interface:
Configuration > PTZ > Prioritize PTZ.
2. Select Network or RS-485 from the dropdown list
3. Set the delay time (Range 2-200s).
4. Click

5.4.10 Position Settings

Purpose:
You can set the position information in this interface.
Steps:
1. Enter the Position Settings interface:
Configuration > PTZ > Position Settings
© Hikvision
to clear the settings.
to save the settings.
Figure 5-37 Position Settings
65