User Manual of Thermal Network Positioning system
5.2.5 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the positioning systems.
Steps:
1.
Enter the Exception settings interface:
Configuration > Event > Basic Event > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to Section
5.2.1 Configuring Motion Detection.
3.
Click
5.3 Smart Event Configuration
The functions vary depending on the models of positioning system.
© Hikvision
Figure 5-19 Exception Settings
to save the settings.
50